Product description
Battery Management system (BMS) 15S50A 48V for Lithium iron phosphate battery pack for 24 series cells of nominal voltage 3.2v. It has following protections
Over Charge Protection: Yes
Over Discharge Voltage: Yes
Short Circuit Protection: Yes
Cell balancing Yes
Over Current Protection Yes
The salient feature of 15S50A 48V LFP BMS are:-
- Short term waterproof to protect battery pack from extreme weather and tough dynamic conditions.
- Common Port design - 2 wires only, Charge and discharge port share the same port.
- BMS comes with balancing connection wire connector to reduce the wire complexity and number of solders.
- Dust proof, shockproof and anti-squeezing, protects circuit from external damages.
- BMS has passive balancing function which gives long life to the batteries.
- The appearance is sealed by injection moulding process to improve moisture-proof and oxidation-proof circuit components and prolong the service life of the products and batteries.
One pack to BMS contains
1) Open BMS circuit board,
2) Wire with snap in connector for connection between cells and BMS.
The BMS 15S 50A comes with equalization function which facilitate to keep the cells at same level and ensure prolong life. The components used in the BMS is Highly integrated IC, low resistance MOS, and high current equalizer.
Battery Management System for 48V 15S50A battery pack configuration of Lithium Iron Phosphate cells.
15S50A 48V LFP BMS
Discharge
Continuous Discharging Current 50A
Over discharge Current Detect Voltage 150±20A
Charge
Charging Voltage 54.75V
Charging Current 25A
Over charge protection
Over Charge Protection Voltage 3.75±0.05V
Release delay of Single Over Charge Protection 1S
Over Charge Release Voltage 3.55±0.05V
Cell balancing
Cell balancing Detection Voltage 3.5V
Cell balancing Current 30±5mA
Over discharge protection
Over Discharge Detect Voltage 2.2±0.05V
Over discharge Detect Delay Time 1S
Over Discharger Release Voltage 2.7±0.05V
Charge/Discharge Overflow protection
Discharge Current Level 2 Protection Current 150±30A
Discharge Current Level 2 Protection delay 1S
Over Current Protection Condition Disconnect the load
Short Circuit Protection
Protection Condition Short circuit of External Load
Detection Delay Time 250 uS
Protection Release Condition Disconnect the load
Temperature Range -20ºC ~ 60ºC
Internal Resistance ≤20mΩ